CNNA Certification Training Basel

Cisco CCNA Certification Course Overview in Basel

Your Cisco CCNA Isn't a Certificate. It's a Career Lever

If you're stuck handling tier-1 help desk tickets, provisioning basic network access, or passively monitoring systems, your career is limited. You understand that the network infrastructure is the nervous system of any business - especially in the high-demand, 24/7 IT environments of Basel - but without validated skills, you can't confidently configure routers, switches, or enforce network security. Cisco Certified Network Associate (CCNA) engineers, on the other hand, are the first line of defense, designing QoS policies, configuring routing protocols, and earning 20-35% higher starting salaries. This is not another passive video tutorial that makes you memorize the OSI layers. Our Cisco Certified Network Associate course is designed by Cisco Certified experts, including CCIEs, who have architected and secured large-scale enterprise networks in telecommunications, banking, and IT service firms across Basel . You'll gain practical hands-on experience with IOS command lines, advanced subnetting, VLAN configuration, ACL security, and troubleshooting techniques essential for isolating and resolving network issues under real-world pressure. Generic IT resumes are filtered out by HR systems searching for "Cisco", "OSPF", and "ACLs". The CCNA 200-301 credential ensures you stand out. It is the globally recognized standard for entry- to mid-level network engineers, validating your ability to configure, maintain, and secure enterprise wired and wireless networks. Our program focuses on the real skills demanded by recruiters: IPv4/IPv6 subnetting speed, routing protocol configuration, VLAN setup, and Access Control List management. You'll get access to dedicated lab environments, complex real-world case studies modeled on Basel enterprise scenarios, and 24/7 expert support to debug your most challenging network issues. Completing this Cisco Certified Network Associate course positions you as a vital, job-ready asset from day one.

Cisco CCNA Certification Training Course Highlights in Basel

More Than a Course - It's Your Career Accelerator

CCNA 200-301 Exam Mastery

The entire curriculum is meticulously engineered to cover 100% of the single CCNA exam blueprint, focusing your time on the most heavily weighted domains.

Hands-on Configuration Labs

Gain technical fluency through dedicated practice configuring IOS routers and switches using Packet Tracer and real-world simulation environments.

Routing Protocol Command

Master the practical configuration and troubleshooting of modern routing protocols, including OSPF (Single-Area) and EIGRP, for efficient Layer 3 connectivity.

Advanced Subnetting Techniques

Learn high-speed, military-grade subnetting methods that ensure you can calculate VLSM and IPv6 addressing accurately under exam and production pressure.

Wireless and Automation Fundamentals

Gain exposure to modern network necessities: Wireless LAN (WLAN) configuration basics and introductory Network Automation/Programmability.

24x7 Expert Guidance & Support

Be worry-free as certified CCIE/CCNP level engineers are available 24/7 to solve your complex routing errors and challenging configuration issues.

Career Relevance

The CCNA 200-301 Training Program certifies professionals in designing, building, and maintaining computer networks. Basel-based IT organizations seek skilled network administrators who can implement scalable network architectures and optimize network performance. With the CCNA certification, candidates demonstrate their expertise in network fundamentals, protocols, and security.

In this program, students learn to configure and manage various network devices, including routers, switches, and firewalls. They gain hands-on experience with network configuration protocols such as Spanning Tree Protocol (STP) and Open Shortest Path First (OSPF). By mastering these technical skills, CCNA professionals can troubleshoot network issues and ensure high availability.

Basel-based companies will benefit from hiring CCNA-certified professionals who can design and implement robust network infrastructure. These experts can ensure seamless communication between network devices and optimize network performance, reducing downtime and improving overall productivity.

Corporate Training

Tailored programs for teams with enterprise support

Learning Models

Choose from digital or instructor-led training for a customized learning experience.

LMS Platform

Access an enterprise-grade Learning Management System built for scalability and security.

Pricing Options

Pick from flexible pricing plans that fit your team size and learning goals.

Performance Dashboards

Track progress with intuitive dashboards for individuals and teams.

24x7 Support

Get round-the-clock learner assistance whenever you need help.

Account Manager

Work with a dedicated account manager who ensures smooth delivery and support.

Ready to transform your team?

Get a custom quote for your organization's training needs.

Request Corporate Quote

Professional Credibility

The CCNA 200-301 Training Program is a comprehensive, vendor-neutral certification program that validates a candidate's skills in network administration. Basel-based IT professionals who earn the CCNA certification demonstrate their commitment to staying current with the latest network technologies and standards. The CCNA certification is a widely recognized industry standard that employers look for in job candidates. To earn the CCNA certification, candidates must demonstrate their expertise in network fundamentals, security, and protocols.

They must also show their ability to configure and manage network devices, including Layer 3 switches and routers. By attaining the CCNA certification, candidates demonstrate their ability to implement scalable network architectures and optimize network performance. Employers in Basel and around the world recognize the value of the CCNA certification. It is considered a gold standard for network administrators and is often a requirement for advanced certifications such as CCNP and CCIE.

By earning the CCNA certification, candidates can open doors to new career opportunities and increase their earning potential.

Upcoming Schedule

Join the next batch that fits your timezone

Skills You Will Gain In Our CCNA 200-301 Certification Training Program

From Knowledge to Actionable Intelligence

High-Speed Subnetting

Learn to calculate IPv4/IPv6 addressing and VLSM in seconds, a non-negotiable skill for both the exam and efficient real-world network design.

Layer 2 Switching Configuration

Master setting up VLANs, configuring Trunks (802.1Q), and securing the Layer 2 domain using protocols like Spanning Tree Protocol (STP).

IP Routing Protocol Implementation

Gain hands-on fluency in configuring, verifying, and troubleshooting OSPF (Single-Area) and EIGRP to ensure dynamic, optimal packet delivery across complex WANs.

Access Control List (ACL) Security

Master designing, implementing, and verifying standard and extended ACLs to enforce granular network security policies and traffic filtering at the router.

Network Address Translation (NAT)

Learn to configure Static and Dynamic NAT/PAT to efficiently manage public and private IP address space - a mandatory skill for almost every Basel enterprise network accessing the Internet.

Wireless and Automation Basics

Gain the foundational skills to configure a WLAN using a WLC (Controller) and understand the basic principles of network programmability (Python, JSON) for future automation tasks.

Who This Program Is For

Ideal Candidates for CCNA Certification Training

Junior Network Engineers and NOC Technicians

IT Support Professionals

System Administrators

Network Architects / Consultants

Recent Engineering / BCA Graduates

If your career trajectory demands command over infrastructure and you are tired of being filtered out, this program is engineered to make you the certified Cisco Network Associate that businesses need.

Industry Applicability

The CCNA 200-301 Training Program is designed to meet the demands of the modern network administration job market. Basel-based companies require skilled professionals who can design, build, and manage network infrastructure. The CCNA certification is a widely recognized industry standard that employers look for in job candidates.

In this program, students learn to configure and manage network protocols such as Internet Protocol (IP) routing and Network Address Translation (NAT). They gain hands-on experience with network devices, including routers, switches, and firewalls. By mastering these technical skills, CCNA professionals can troubleshoot network issues and ensure high availability.

Basel-based companies will benefit from hiring CCNA-certified professionals who can design and implement robust network infrastructure. These experts can ensure seamless communication between network devices and optimize network performance, reducing downtime and improving overall productivity.

Microsoft Training Program Roadmap in Basel

The Step-by-Step System for First-Attempt Success

Step 1: Secure Your Path

Enroll, choose your modality, and gain immediate access to the 2000+ question simulator and lab guides.

Step 2: Master the IOS Commands

Complete the expert-led, 60-hour training, focusing intensely on configuration syntax and troubleshooting methodologies.

Step 3: Build & Break in the Lab

Spend dedicated hours on labs, configuring complex VLANs, Trunks, and OSPF topologies using Packet Tracer and simulators.

Step 4: Pinpoint & Crush Weakness

Execute a minimum of 7 full-length mock exams. Use performance analytics to zero in on weak areas like IPv6 or security ACLs.

Step 5: Conquer Subnetting Speed

Utilize dedicated drills to achieve sub-15 second subnetting calculations - a non-negotiable for passing timed, scenario-based questions.

Step 6: Execute & Pass

Walk in prepared and pass the Cisco CCNA 200-301 exam on your first, confident attempt.

Step 7: Leverage Your Credential

Update your resume with "CCNA Certified" and "Cisco IOS Expert," unlocking mid-level Network Engineer roles with a major salary increase.

1/7

Why Get CCNA Certified?

The Credential That Ends the Gatekeeping

Stop getting filtered out by HR systems

Secure more interview calls by meeting the CCNA keyword requirement in networking job screenings.

Unlock NOC & Mid-Level Engineering Roles

Prove your ability to configure, secure, and troubleshoot real enterprise networking environments.

Transition from Support to Infrastructure Engineer

Build the technical credibility needed to influence network stability, design, and architecture decisions.

Eligibility and Pre-requisites

For CCNA Certification

The CCNA 200-301 certification is the foundational, yet comprehensive, networking certification. It requires no formal degree but demands technical rigor.

Eligibility Criteria:

Experience (Recommended): One or more years working with Cisco products is helpful, though many successful learners succeed through focused lab-based training alone.

Prior Certification: None required - CCNA 200-301 is the foundational exam that leads into CCNP and CCIE tracks.

Technical Focus: Requires hands-on fluency in IOS command line, Layer 2/Layer 3 protocols, IP addressing & subnetting, and basic security & wireless configuration.

Practical Application

During the CCNA 200-301 Training Program, students gain hands-on experience with network simulation tools and hands-on labs. They learn to configure and manage various network devices, including routers, switches, and firewalls. By mastering these technical skills, CCNA professionals can troubleshoot network issues and ensure high availability. In this program, students learn to configure and manage network protocols such as Dynamic Host Configuration Protocol (DHCP) and Simple Network Management Protocol (SNMP).

They gain hands-on experience with network configuration tools, including Cisco's Network Assistant and CiscoWorks. By mastering these technical skills, CCNA professionals can design and implement robust network infrastructure. Basel-based companies will benefit from hiring CCNA-certified professionals who can design and implement scalable network architectures and optimize network performance. These experts can ensure seamless communication between network devices and reduce downtime.

The CCNA 200-301 Training Program is designed to equip professionals with the skills and knowledge required to succeed in the modern network administration job market. Basel-based IT organizations require skilled network administrators who can design, build, and maintain computer networks. By earning the CCNA certification, candidates can open doors to new career opportunities and increase their earning potential.

Course Modules & Curriculum

Comprehensive modules covering all knowledge areas

Module 1 Network Fundamentals and Layer 2 Switching ▾

Lesson 1: Internetworking Basics and OSI/TCP-IP Models

Master the core concepts: OSI layers, encapsulation, and the functions of networking devices. Understand the flow of data across the network.

Lesson 2: IP Addressing: IPv4/IPv6 and Subnetting

Learn the critical skills of IP addressing, including classes, public/private addressing, and advanced subnetting techniques such as VLSM. Master high-speed IPv6 subnetting to prepare for real-world enterprise networks. This is a core topic in the Cisco Certified Network Associate course.

Lesson 3: Cisco IOS and Layer 2 Switching

Get hands-on with the Cisco Certified Network environment. Learn to configure routers and switches using Cisco IOS, set up VLANs, configure 802.1Q trunks, and secure console access. These skills are fundamental for progressing toward the Cisco Certified Network Professional or Cisco Certified Specialist credentials.

Module 2 Advanced Switching and Redundancy ▾

Lesson 1: Spanning Tree Protocol (STP)

Master the purpose and operation of STP to prevent Layer 2 loops and ensure network stability. Learn to configure port priorities and root bridge elections, a key skill for any Cisco Certified Network Associate.

Lesson 2: Inter-VLAN Routing and Gateway Redundancy

Master configuring Router-on-a-Stick and Layer 3 Switching for Inter-VLAN communication. Introduction to First Hop Redundancy Protocols (FHRP) (HSRP/VRRP).

Lesson 3: EtherChannel and Link Aggregation

Learn to bundle multiple physical links into a single logical connection using EtherChannel. Understand link aggregation techniques to increase bandwidth and provide redundancy in core switch connections, essential for progressing toward Cisco Certified Network Professional and Cisco Certified Specialist credentials.

Module 3 IP Routing Protocols ▾

Lesson 1: Static and Default Routing

Master the configuration and verification of Static and Default Routes - the simple, reliable method for basic Layer 3 forwarding and internet access.

Lesson 2: OSPF (Open Shortest Path First)

Deep dive into the OSPF link-state routing protocol. Master single-area configuration, neighbor relationships, and troubleshooting common OSPF adjacency issues.

Lesson 3: EIGRP (Enhanced Interior Gateway Routing Protocol)

Master the configuration and verification of the EIGRP advanced distance-vector protocol, focusing on neighbor formation, DUAL fundamentals, and metric calculation.

Module 4 Security, NAT, and WAN ▾

Lesson 1: Access Control Lists (ACLs)

Master designing, implementing, and verifying Standard and Extended ACLs on routers to filter traffic based on IP addresses, ports, and protocols for security enforcement.

Lesson 2: Network Address Translation (NAT/PAT)

Learn to configure Static, Dynamic, and PAT (Port Address Translation) to enable private internal networks to communicate securely with the external Internet. This is a core topic in the Cisco Certified Network Associate course and a critical step toward Cisco Certified Network Professional certification.

Lesson 3: Wide Area Networks (WAN) and VPN Basics

Understand WAN technologies like MPLS and Leased Lines. Gain hands-on knowledge to configure point-to-point connections and grasp the fundamentals of site-to-site VPNs. These concepts are vital for Cisco Certified Specialists and Cisco Certified CyberOps Associate aspirants focusing on network security.

Module 5 Wireless, Automation, and Exam Readiness ▾

Lesson 1: Wireless LAN (WLAN) Fundamentals

Master basic concepts of RF, SSID, and channels. Learn to configure a simple WLAN using a Wireless LAN Controller (WLC) and understand security protocols (WPA3).

Lesson 2: Network Automation and Programmability

Get introduced to automation tools such as Python, JSON, and APIs. Learn how network engineers use these tools to monitor and manage network configurations programmatically. This is a key focus area in the Cisco Certified Network Associate course and prepares candidates for Cisco Certified CyberOps Associate and Cisco Certified Network Professional roles.

Lesson 3: Final Exam Strategy and Troubleshooting

Consolidate all your knowledge across lessons. Master Cisco's troubleshooting methodology, including top-down and bottom-up approaches. Practice full-length simulations to ensure first-attempt success for the Cisco Certified Specialist and other certification exams.

Cisco CCNA 200-301 Certification & Exam FAQ

Find answers to common questions about our course and certification

What is the official name of the CCNA exam? ▾

The official name is the CCNA 200-301 exam, which covers a broad range of foundational networking topics across routing, switching, security, and wireless.

How much does the Cisco CCNA 200-301 exam cost? ▾

The exam registration fee is $300 USD (or its rupee equivalent at the time of booking). This significant cost makes a first-time pass a financial necessity - prepare properly.

How many questions are on the CCNA exam and how long do I have? ▾

The exam typically has 100 to 120 questions (multiple-choice, drag-and-drop, and simlets). You have 120 minutes (2 hours) to complete the exam. Speed and efficiency are critical.

What is the passing score for the Cisco CCNA exam? ▾

Cisco does not publish a hard passing score, but historically, candidates need to achieve approximately 825 out of 1000 total points to pass. You must aim for deep mastery, not minimal knowledge.

Does the CCNA exam still have hands-on simulation questions (Simlets)? ▾

Yes. The exam contains simulation questions (Simlets/Testlets) where you must log into a simulated router/switch and use IOS commands to troubleshoot or configure a device. Our labs prepare you for this.

Can I take the CCNA exam online or do I need to visit a testing center? ▾

You have the choice of taking the exam via remote online proctoring or at a Pearson VUE testing center. For stability and to avoid connectivity issues, we strongly recommend using a physical testing center in major Basel cities.

How long is my CCNA certification valid? ▾

The CCNA certification is valid for three years. To recertify, you must pass another qualifying exam or earn Continuing Education (CE) credits through official Cisco training and activities.

What happens if I fail the CCNA exam? ▾

If you fail, you must wait five calendar days (including the day of failure) before retaking the exam. You must pay the full $300 USD fee for each attempt.

Is the CCNA focused on IPv4 or IPv6? ▾

The exam is focused on both. You must be proficient in all aspects of IPv4 (especially advanced subnetting) and understand the structure, addressing, and routing of IPv6.

What is the function of an Access Control List (ACL)? ▾

An ACL is a set of sequential permit/deny statements used on a router to filter network traffic based on criteria like source/destination IP address, port number, or protocol, enforcing network security.

Do I need to buy expensive Cisco hardware for the labs? ▾

No. Our program uses Cisco's official Packet Tracer software and high-fidelity simulation environments that perfectly replicate the IOS command-line experience for all necessary labs.

How quickly can I schedule my exam after the training is complete? ▾

You can schedule your exam immediately. We advise taking the exam within 1-2 weeks of course completion to ensure the complex configuration syntax and subnetting speed are at their peak.

What routing protocols are covered in the CCNA 200-301 exam? ▾

The exam covers the configuration and verification of Static Routing, OSPFv2 (Single-Area), and EIGRP fundamentals, along with route summarization and path selection.

What study materials does Cisco recommend? ▾

Cisco points to their official curriculum and study guides. We synthesize this material into a structured, lab-intensive program that focuses on the practical configuration and troubleshooting needed for the exam.

Is this certification recognized for telecom roles in Basel? ▾

Absolutely. The CCNA is a mandatory baseline for engineers in telecommunications, ISP operations, and data centers in Basel, where Cisco technology dominates the core infrastructure.

Growth

In this program, students learn to configure and manage network protocols such as Enhanced Interior Gateway Routing Protocol (EIGRP) and Border Gateway Protocol (BGP). They gain hands-on experience with network devices, including Layer 3 switches and routers.

By mastering these technical skills, CCNA professionals can troubleshoot network issues and ensure high availability. CCNA-certified professionals in Basel can pursue advanced certifications such as CCNP and CCIE, which can lead to career advancement opportunities.

Employers recognize the value of the CCNA certification, and it is often a requirement for advanced certifications.

Customer Testimonials

Hear from our successful graduates

★ ★ ★ ★ ★

Great class, very informative.

James Conklin

Project Manager, Harris Health System

★ ★ ★ ★ ★

Great PMP® Bootcamp. I had a great time taking this course. I took the course to prepare to sit for the CAPM® but may be able to sit for the PMP®. I learnt a lot was challenging. Great course. We need one more day. Content was very detailed.

Karle Scroggins

Operations Coordinator, Harris Health System

★ ★ ★ ★ ★

it was a great class. Lots of energy. And I enjoyed.

John Denke

Project Manager , Boeing

★ ★ ★ ★ ★

Fantastic course to prepare for PMP® exam.

Kevin Hambrice

Global Factory Sales & Marketing Manager, ABB

★ ★ ★ ★ ★

As a participant it was smooth sailing for me.

Eric S. Tumlinson

Sr. Project Manager, Montco Oilfield Contractors, LLC

★ ★ ★ ★ ★

Trainer was excellent. Shared good resources and good experiences.

Khemoni Holmes

Project Manager, Harris Health System

★ ★ ★ ★ ★

Good content and training.

Dennis Glover

Project Manager, eProtex

★ ★ ★ ★ ★

I wanted to let you know that I took and passed the PMP exam. Thanks to iCert Global and especially my Cincinnati course instructor, who was an excellent teacher and helped me immensely.

Steve Ditty

Executive Director, Cogent IBS

★ ★ ★ ★ ★

Trainer was good. Trainer was very engaged and interacting. Very much satisfied with the training.

Stefan Long

Owner, MAGMAX Group LLC

★ ★ ★ ★ ★

I was pleasantly surprised at the quality of this training. Yomi was awesome as a trainer and working to make sure that we understood the concepts. Controlling Cost and Controlling Risk are the most complicated, but Yomi spent time after class working through questions to help others understand. This class also helped to change my perception of the PMP being this MONSTER to something that I can I can successfully do.

Nancy Davis

Sr. Project Manager , GK Software USA, Inc

★ ★ ★ ★ ★

Great class with a lot of information and tips to prepare for the exam

John Eric Nelson

Business Development Manager , WCA Waste

★ ★ ★ ★ ★

It was a great course, covered all the things that i ended up hitting road bumps on. I was the only one in the class, but the trainer was just as involved as if it had been a full class.

Mark Butler

Project Manager, Starbucks Via Aerotek

★ ★ ★ ★ ★

I was nervous about taking it online versus classroom; but I am actually glad I took it online. Instructor was very great and gave a good learning experience with his relevant project management experience.

Xeng Yang

IT Specialist, Beautiful Creations & More

★ ★ ★ ★ ★

The training was very intense but covered with course material. It was more than I expected.

Bernadette Gilliam

Operations/Technical Support Analyst , The Johns Hopkins Hospital

★ ★ ★ ★ ★

I thought the class was very informative. The instructor did an excellent job breaking down each chapter to where it was easy to understand. I was also very impressed with his commitment to help us pass ever after the class is over.

Taylor Mitchell

Business Management, AT&T

★ ★ ★ ★ ★

Excellent training. Instructor was very knowledgeable and explained information in an understandable way

Sandra Hamilton Allen

Sales Analyst , Alcon

★ ★ ★ ★ ★

Quality Materials presented, Instructor very knowledgeable. Exceeded my expectations.

Anthony Muldrow

Engineering Safety Manager, SNC-Lavalin

★ ★ ★ ★ ★

The training is a great introduction into the PMI mindset. Very informative and helpful

Bryan Tamburro

Managing Partner, Arrakis Development LLC

★ ★ ★ ★ ★

The training is a great introduction into the PMI mindset. Very informative and helpful

Joseph Quass

Senior Financial Analyst , Stanford Healthcare

★ ★ ★ ★ ★

All positive - trainer has vast experience in different types of projects which helped with the examples he provided

Alaa Ahmed Hameed Al-Kayat

Business Development Manager , Louis Berger

★ ★ ★ ★ ★

Great! Lots of material and very helpful to not only learn the material but also prepare for the exam. Completely satisfied with the training.

Jason Lui

Senior Product Manager, Ingenio

★ ★ ★ ★ ★

Great Course. Dr. Ram was an awesome teacher. I could listen to him all day.

Colleen Lee

Software Engineer, Johns Hopkins Community Physicians

★ ★ ★ ★ ★

I completed the Online Training Session and thought it was well put together and satisfied everything I expected.

Brent Herring

Site Project Controls Manager , Performance Contractors Inc

★ ★ ★ ★ ★

I really enjoyed how thorough trainer was with the course information and taking time to elaborate on areas that may have been somewhat confusing. He did a tremendous job in making sure that we knew what would possibly be on the exam and ensuring our confidence to take the exam within the next few months. Overall, I thought the course was great and trainer was exceptional in his teaching of the curriculum.

Quentin Cheeks

Marketing & Communications Project Coordinator, Johns Hopkins Community Physicians

★ ★ ★ ★ ★

Great content. Teacher did an excellent job of presenting the material, knew the material well.

Patrick Hinckley

Program Manager , P&W

Course & Support

Everything you need to know about our training options and support

How long does the training take to complete? ▾

The core Cisco Certified Network Associate course is an intensive 60-hour hands-on program, delivered over 8-10 weekends or as a high-intensity 4-day full-time boot camp.

What are the different training formats available? ▾

We offer three options: E-Learning for self-paced practice, Instructor-Led Live Class for real-time configuration debugging, and Classroom Training for an immersive, dedicated boot camp.

Are the classes live or just pre-recorded videos? ▾

Our sessions are live and fully interactive. This is a demanding environment where you are expected to follow along, write configuration commands, and troubleshoot network errors in real-time.

What if a work commitment forces me to miss a scheduled class? ▾

Every session is recorded and available within 24 hours. You also have the flexibility to attend the same missed module in any other running batch at no extra cost.

How flexible is the program if my schedule changes unexpectedly? ▾

Completely flexible. You can switch batches (weekend to weekday) or formats (online to in-person) at any time during your Cisco Certified Specialist training.

Who are the instructors? ▾

Our instructors are CCIE and CCNP certified experts with deep, current experience building and troubleshooting large-scale, high-availability networks across Basel.

What are the class sizes like? ▾

We maintain small batch sizes to ensure hands-on lab support and individualized guidance for every participant in our Cisco Certified Network Associate course.

Is there a difference between the weekday and weekend batches? ▾

No. The CCNA curriculum, the expert instructors, and the intensity of the hands-on labs are identical. Only the schedule is adjusted to suit your professional commitment.

Do I need any special software to attend? ▾

No. You only need the free Cisco Packet Tracer software (provided with instruction) and a stable internet connection. All labs are performed within this simulation environment.

Is this training valid for candidates outside Basel ? ▾

Yes. The CCNA certification is globally recognized, and our program aligns with the international Cisco 200-301 exam blueprint.