Cisco CCNA Certification Course Overview in Wentzville, MO

Your Cisco CCNA Isn't a Certificate. It's a Career Lever

If you're stuck handling tier-1 help desk tickets, provisioning basic network access, or passively monitoring systems, your career is limited. You understand that the network infrastructure is the nervous system of any business - especially in the high-demand, 24/7 IT environments of Wentzville, MO - but without validated skills, you can't confidently configure routers, switches, or enforce network security. Cisco Certified Network Associate (CCNA) engineers, on the other hand, are the first line of defense, designing QoS policies, configuring routing protocols, and earning 20-35% higher starting salaries. This is not another passive video tutorial that makes you memorize the OSI layers. Our Cisco Certified Network Associate course is designed by Cisco Certified experts, including CCIEs, who have architected and secured large-scale enterprise networks in telecommunications, banking, and IT service firms across Wentzville, MO . You'll gain practical hands-on experience with IOS command lines, advanced subnetting, VLAN configuration, ACL security, and troubleshooting techniques essential for isolating and resolving network issues under real-world pressure. Generic IT resumes are filtered out by HR systems searching for "Cisco", "OSPF", and "ACLs". The CCNA 200-301 credential ensures you stand out. It is the globally recognized standard for entry- to mid-level network engineers, validating your ability to configure, maintain, and secure enterprise wired and wireless networks. Our program focuses on the real skills demanded by recruiters: IPv4/IPv6 subnetting speed, routing protocol configuration, VLAN setup, and Access Control List management. You'll get access to dedicated lab environments, complex real-world case studies modeled on Wentzville, MO enterprise scenarios, and 24/7 expert support to debug your most challenging network issues. Completing this Cisco Certified Network Associate course positions you as a vital, job-ready asset from day one.

Cisco CCNA Certification Training Course Highlights in Wentzville, MO

More Than a Course - It's Your Career Accelerator

★

CCNA 200-301 Exam Mastery

The entire curriculum is meticulously engineered to cover 100% of the single CCNA exam blueprint, focusing your time on the most heavily weighted domains.

★

Hands-on Configuration Labs

Gain technical fluency through dedicated practice configuring IOS routers and switches using Packet Tracer and real-world simulation environments.

★

Routing Protocol Command

Master the practical configuration and troubleshooting of modern routing protocols, including OSPF (Single-Area) and EIGRP, for efficient Layer 3 connectivity.

★

Advanced Subnetting Techniques

Learn high-speed, military-grade subnetting methods that ensure you can calculate VLSM and IPv6 addressing accurately under exam and production pressure.

★

Wireless and Automation Fundamentals

Gain exposure to modern network necessities: Wireless LAN (WLAN) configuration basics and introductory Network Automation/Programmability.

★

24x7 Expert Guidance & Support

Be worry-free as certified CCIE/CCNP level engineers are available 24/7 to solve your complex routing errors and challenging configuration issues.

Professional Credibility

Achieving the Cisco Certified Network Associate (CCNA 200-301) certification is a significant accomplishment that demonstrates a professional's expertise in networking fundamentals. The training program covers a wide range of topics, including routing and switching, network security, and automation.

Passing this exam validates a candidate's ability to install, configure, and troubleshoot small- to medium-sized networks. The training program emphasizes hands-on experience with Cisco routing and switching equipment, as well as a solid understanding of network protocols such as OSPF, EIGRP, and BGP.

These technical details are essential for networking professionals to master, as they form the foundation of modern network architectures. In the Wentzville, MO area, acquiring the CCNA 200-301 certification can greatly enhance job prospects for networking professionals, as many local businesses rely heavily on network infrastructure to drive their operations.

Corporate Training

Tailored programs for teams with enterprise support

Learning Models
Choose from digital or instructor-led training for a customized learning experience.
LMS Platform
Access an enterprise-grade Learning Management System built for scalability and security.
Pricing Options
Pick from flexible pricing plans that fit your team size and learning goals.
Performance Dashboards
Track progress with intuitive dashboards for individuals and teams.
24/7 Support
Get round-the-clock learner assistance whenever you need help.
Account Manager
Work with a dedicated account manager who ensures smooth delivery and support.
Corporate Training

Ready to transform your team?

Get a custom quote for your organization's training needs.

Request Corporate Quote

Work Responsibilities

Network administrators with the Cisco Certified Network Associate (CCNA 200-301) certification are responsible for ensuring the reliability, security, and performance of network infrastructure. They install and configure network devices, troubleshoot connectivity issues, and implement network security measures to prevent unauthorized access.

This role requires a strong understanding of networking protocols and standards. To perform these duties effectively, network administrators must be proficient in using command-line interfaces (CLI) to configure and manage Cisco routers and switches.

They also need to understand how to implement Quality of Service (QoS) policies to prioritize network traffic and ensure efficient data transmission. In Wentzville, MO, network administrators with the CCNA 200-301 certification can take on more complex responsibilities, such as designing and implementing network architectures for local businesses, or providing technical support for large-scale networks.

Upcoming Schedule

Join the next batch that fits your timezone
New York Batch
London Batch
Sydney Batch

Skills You Will Gain In Our CCNA 200-301 Certification Training Program

From Knowledge to Actionable Intelligence

High-Speed Subnetting

Learn to calculate IPv4/IPv6 addressing and VLSM in seconds, a non-negotiable skill for both the exam and efficient real-world network design.

Layer 2 Switching Configuration

Master setting up VLANs, configuring Trunks (802.1Q), and securing the Layer 2 domain using protocols like Spanning Tree Protocol (STP).

IP Routing Protocol Implementation

Gain hands-on fluency in configuring, verifying, and troubleshooting OSPF (Single-Area) and EIGRP to ensure dynamic, optimal packet delivery across complex WANs.

Access Control List (ACL) Security

Master designing, implementing, and verifying standard and extended ACLs to enforce granular network security policies and traffic filtering at the router.

Network Address Translation (NAT)

Learn to configure Static and Dynamic NAT/PAT to efficiently manage public and private IP address space - a mandatory skill for almost every Wentzville, MO enterprise network accessing the Internet.

Wireless and Automation Basics

Gain the foundational skills to configure a WLAN using a WLC (Controller) and understand the basic principles of network programmability (Python, JSON) for future automation tasks.

Who This Program Is For

Ideal Candidates for CCNA Certification Training

This certification training is ideal for:

Junior Network Engineers and NOC Technicians

IT Support Professionals

System Administrators

Network Architects / Consultants

Recent Engineering / BCA Graduates

If your career trajectory demands command over infrastructure and you are tired of being filtered out, this program is engineered to make you the certified Cisco Network Associate that businesses need.

Industry Applicability

The Cisco Certified Network Associate (CCNA 200-301) certification is widely recognized and respected in the IT industry. This certification demonstrates a professional's ability to design, build, and manage small- to medium-sized networks, making them a valuable asset to any organization.

The training program covers a broad range of topics, ensuring that professionals have a solid understanding of network fundamentals. To achieve the CCNA 200-301 certification, candidates must demonstrate a strong understanding of network protocols, including TCP/IP and DHCP.

They must also be able to configure and troubleshoot network devices using Cisco's IOS software. In the Wentzville, MO area, the CCNA 200-301 certification can open doors to new career opportunities in fields such as network administration, network engineering, and cybersecurity.

Microsoft Training Program Roadmap in Wentzville, MO

The Step-by-Step System for First-Attempt Success
Roadmap Illustration Roadmap Illustration Mobile

Step 1: Secure Your Path

enroll, choose your modality, and gain immediate access to the 2000+ question simulator and lab guides.

Step 2: Master the IOS Commands

Complete the expert-led, 60-hour training, focusing intensely on configuration syntax and troubleshooting methodologies.

Step 3: Build & Break in the Lab

Spend dedicated hours on labs, configuring complex VLANs, Trunks, and OSPF topologies using Packet Tracer and simulators.

Step 4: Pinpoint & Crush Weakness

Execute a minimum of 7 full-length mock exams. Use performance analytics to zero in on weak areas like IPv6 or security ACLs.

Step 5: Conquer Subnetting Speed

Utilize dedicated drills to achieve sub-15 second subnetting calculations - a non-negotiable for passing timed, scenario-based questions.

Step 6: Execute & Pass

Walk in prepared and pass the Cisco CCNA 200-301 exam on your first, confident attempt.

Step 7: Leverage Your Credential

Update your resume with "CCNA Certified" and "Cisco IOS Expert," unlocking mid-level Network Engineer roles with a major salary increase.

1/7

Why Get CCNA Certified?

The Credential That Ends the Gatekeeping

Stop getting filtered out by HR systems

Secure more interview calls by meeting the CCNA keyword requirement in networking job screenings.

Unlock NOC & Mid-Level Engineering Roles

Prove your ability to configure, secure, and troubleshoot real enterprise networking environments.

Transition from Support to Infrastructure Engineer

Build the technical credibility needed to influence network stability, design, and architecture decisions.

Eligibility and prerequisites

For CCNA Certification

The CCNA 200-301 certification is the foundational, yet comprehensive, networking certification. It requires no formal degree but demands technical rigor.

Eligibility Criteria:

Experience (Recommended): One or more years working with Cisco products is helpful, though many successful learners succeed through focused lab-based training alone.

Prior Certification: None required - CCNA 200-301 is the foundational exam that leads into CCNP and CCIE tracks.

Technical Focus: Requires hands-on fluency in IOS command line, Layer 2/Layer 3 protocols, IP addressing & subnetting, and basic security & wireless configuration.

Growth

Review the eligibility criteria and prerequisites for this certification before you enroll

The Cisco Certified Network Associate (CCNA 200-301) certification is a stepping stone for networking professionals looking to advance their careers. With this certification, professionals can transition into more senior roles, such as network engineer or network architect.

The training program provides a solid foundation in networking fundamentals, which can be applied to a wide range of network architectures. To achieve the CCNA 200-301 certification, candidates must pass a comprehensive exam that tests their knowledge of network protocols, routing and switching, and network security.

They must also demonstrate hands-on experience with Cisco routing and switching equipment. In Wentzville, MO, networking professionals with the CCNA 200-301 certification can take on leadership roles, overseeing the design and implementation of network architectures for local businesses.

CCNA Course Modules & Curriculum

Comprehensive modules covering all knowledge areas
MODULE - 1

Network Fundamentals and Layer 2 Switching

LESSON 1

Lesson 1: Internetworking Basics and OSI/TCP-IP Models

Master the core concepts: OSI layers, encapsulation, and the functions of networking devices. Understand the flow of data across the network.

LESSON 2

Lesson 2: IP Addressing: IPv4/IPv6 and Subnetting

Learn the critical skills of IP addressing, including classes, public/private addressing, and advanced subnetting techniques such as VLSM. Master high-speed IPv6 subnetting to prepare for real-world enterprise networks. This is a core topic in the Cisco Certified Network Associate course.

LESSON 3

Lesson 3: Cisco IOS and Layer 2 Switching

Get hands-on with the Cisco Certified Network environment. Learn to configure routers and switches using Cisco IOS, set up VLANs, configure 802.1Q trunks, and secure console access. These skills are fundamental for progressing toward the Cisco Certified Network Professional or Cisco Certified Specialist credentials.

MODULE - 2

Advanced Switching and Redundancy

LESSON 1

Lesson 1: Spanning Tree Protocol (STP)

Master the purpose and operation of STP to prevent Layer 2 loops and ensure network stability. Learn to configure port priorities and root bridge elections, a key skill for any Cisco Certified Network Associate.

LESSON 2

Lesson 2: Inter-VLAN Routing and Gateway Redundancy

Master configuring Router-on-a-Stick and Layer 3 Switching for Inter-VLAN communication. Introduction to First Hop Redundancy Protocols (FHRP) (HSRP/VRRP).

LESSON 3

Lesson 3: EtherChannel and Link Aggregation

Learn to bundle multiple physical links into a single logical connection using EtherChannel. Understand link aggregation techniques to increase bandwidth and provide redundancy in core switch connections, essential for progressing toward Cisco Certified Network Professional and Cisco Certified Specialist credentials.

MODULE - 3

IP Routing Protocols

LESSON 1

Lesson 1: Static and Default Routing

Master the configuration and verification of Static and Default Routes - the simple, reliable method for basic Layer 3 forwarding and internet access.

LESSON 2

Lesson 2: OSPF (Open Shortest Path First)

Deep dive into the OSPF link-state routing protocol. Master single-area configuration, neighbor relationships, and troubleshooting common OSPF adjacency issues.

LESSON 3

Lesson 3: EIGRP (Enhanced Interior Gateway Routing Protocol)

Master the configuration and verification of the EIGRP advanced distance-vector protocol, focusing on neighbor formation, DUAL fundamentals, and metric calculation.

MODULE - 4

Security, NAT, and WAN

LESSON 1

Lesson 1: Access Control Lists (ACLs)

Master designing, implementing, and verifying Standard and Extended ACLs on routers to filter traffic based on IP addresses, ports, and protocols for security enforcement.

LESSON 2

Lesson 2: Network Address Translation (NAT/PAT)

Learn to configure Static, Dynamic, and PAT (Port Address Translation) to enable private internal networks to communicate securely with the external Internet. This is a core topic in the Cisco Certified Network Associate course and a critical step toward Cisco Certified Network Professional certification.

LESSON 3

Lesson 3: Wide Area Networks (WAN) and VPN Basics

Understand WAN technologies like MPLS and Leased Lines. Gain hands-on knowledge to configure point-to-point connections and grasp the fundamentals of site-to-site VPNs. These concepts are vital for Cisco Certified Specialists and Cisco Certified CyberOps Associate aspirants focusing on network security.

MODULE - 5

Wireless, Automation, and Exam Readiness

LESSON 1

Lesson 1: Wireless LAN (WLAN) Fundamentals

Master basic concepts of RF, SSID, and channels. Learn to configure a simple WLAN using a Wireless LAN Controller (WLC) and understand security protocols (WPA3).

LESSON 2

Lesson 2: Network Automation and Programmability

Get introduced to automation tools such as Python, JSON, and APIs. Learn how network engineers use these tools to monitor and manage network configurations programmatically. This is a key focus area in the Cisco Certified Network Associate course and prepares candidates for Cisco Certified CyberOps Associate and Cisco Certified Network Professional roles.

LESSON 3

Lesson 3: Final Exam Strategy and Troubleshooting

Consolidate all your knowledge across lessons. Master Cisco's troubleshooting methodology, including top-down and bottom-up approaches. Practice full-length simulations to ensure first-attempt success for the Cisco Certified Specialist and other certification exams.

Course & Support

Everything you need to know about our training options and support

What is the official name of the CCNA exam?
The official name is the CCNA 200-301 exam, which covers a broad range of foundational networking topics across routing, switching, security, and wireless.
How much does the Cisco CCNA 200-301 exam cost?
The exam registration fee is $300 USD (or its rupee equivalent at the time of booking). This significant cost makes a first-time pass a financial necessity - prepare properly.
How many questions are on the CCNA exam and how long do I have?
The exam typically has 100 to 120 questions (multiple-choice, drag-and-drop, and simlets). You have 120 minutes (2 hours) to complete the exam. Speed and efficiency are critical.
What is the passing score for the Cisco CCNA exam?
Cisco does not publish a hard passing score, but historically, candidates need to achieve approximately 825 out of 1000 total points to pass. You must aim for deep mastery, not minimal knowledge.
Does the CCNA exam still have hands-on simulation questions (Simlets)?
Yes. The exam contains simulation questions (Simlets/Testlets) where you must log into a simulated router/switch and use IOS commands to troubleshoot or configure a device. Our labs prepare you for this.
Can I take the CCNA exam online or do I need to visit a testing center?
You have the choice of taking the exam via remote online proctoring or at a Pearson VUE testing center. For stability and to avoid connectivity issues, we strongly recommend using a physical testing center in major Wentzville, MO cities.
How long is my CCNA certification valid?
The CCNA certification is valid for three years. To recertify, you must pass another qualifying exam or earn Continuing Education (CE) credits through official Cisco training and activities.
What happens if I fail the CCNA exam?
If you fail, you must wait five calendar days (including the day of failure) before retaking the exam. You must pay the full $300 USD fee for each attempt.
Is the CCNA focused on IPv4 or IPv6?
The exam is focused on both. You must be proficient in all aspects of IPv4 (especially advanced subnetting) and understand the structure, addressing, and routing of IPv6.
What is the function of an Access Control List (ACL)?
An ACL is a set of sequential permit/deny statements used on a router to filter network traffic based on criteria like source/destination IP address, port number, or protocol, enforcing network security.
Do I need to buy expensive Cisco hardware for the labs?
No. Our program uses Cisco's official Packet Tracer software and high-fidelity simulation environments that perfectly replicate the IOS command-line experience for all necessary labs.
How quickly can I schedule my exam after the training is complete?
You can schedule your exam immediately. We advise taking the exam within 1-2 weeks of course completion to ensure the complex configuration syntax and subnetting speed are at their peak.
What routing protocols are covered in the CCNA 200-301 exam?
The exam covers the configuration and verification of Static Routing, OSPFv2 (Single-Area), and EIGRP fundamentals, along with route summarization and path selection.
What study materials does Cisco recommend?
Cisco points to their official curriculum and study guides. We synthesize this material into a structured, lab-intensive program that focuses on the practical configuration and troubleshooting needed for the exam.
Is this certification recognized for telecom roles in Wentzville, MO?
Absolutely. The CCNA is a mandatory baseline for engineers in telecommunications, ISP operations, and data centers in Wentzville, MO, where Cisco technology dominates the core infrastructure.
How long does the training take to complete?
The core Cisco Certified Network Associate course is an intensive 60-hour hands-on program, delivered over 8-10 weekends or as a high-intensity 4-day full-time boot camp.
What are the different training formats available?
We offer three options: E-Learning for self-paced practice, Instructor-Led Live Class for real-time configuration debugging, and Classroom Training for an immersive, dedicated boot camp.
Are the classes live or just pre-recorded videos?
Our sessions are live and fully interactive. This is a demanding environment where you are expected to follow along, write configuration commands, and troubleshoot network errors in real-time.
What if a work commitment forces me to miss a scheduled class?
Every session is recorded and available within 24 hours. You also have the flexibility to attend the same missed module in any other running batch at no extra cost.
How flexible is the program if my schedule changes unexpectedly?
Completely flexible. You can switch batches (weekend to weekday) or formats (online to in-person) at any time during your Cisco Certified Specialist training.
Who are the instructors?
Our instructors are CCIE and CCNP certified experts with deep, current experience building and troubleshooting large-scale, high-availability networks across Wentzville, MO.
What are the class sizes like?
We maintain small batch sizes to ensure hands-on lab support and individualized guidance for every participant in our Cisco Certified Network Associate course.
Is there a difference between the weekday and weekend batches?
No. The CCNA curriculum, the expert instructors, and the intensity of the hands-on labs are identical. Only the schedule is adjusted to suit your professional commitment.
Do I need any special software to attend?
No. You only need the free Cisco Packet Tracer software (provided with instruction) and a stable internet connection. All labs are performed within this simulation environment.
Is this training valid for candidates outside Wentzville, MO ?
Yes. The CCNA certification is globally recognized, and our program aligns with the international Cisco 200-301 exam blueprint.
Does this program provide all the knowledge needed for the single CCNA exam?
Yes. Our curriculum is rigorously mapped to cover 100% of the CCNA 200-301 Exam Content Outline, focusing on configuration and troubleshooting domains.
How realistic are the 2000+ practice questions?
They are designed as scenario-based, situational, and multi-protocol questions that perfectly mimic the difficulty, format, and depth of the official exam.
What's included in the exam simulator access?
You get unlimited access to our CCNA exam simulator for 3 months, featuring 10+ full-length, timed mock exams that replicate the extreme pressure and question style of the real test.
What does "lifetime access" to course materials mean?
It means permanent access to our digital library?all configuration lab guides, subnetting resources, video recordings, and, crucially, all future updates to the CCNA curriculum.
Can I retake the mock tests?
Yes. You have unlimited attempts on all mock tests. This is mandatory for building the necessary speed and scoring confidence to pass the CCNA.
Are the course materials kept up-to-date with new Cisco IOS features?
Constantly. Our curriculum is rigorously maintained to align with the latest Cisco IOS versions and the evolving CCNA blueprint, including the new emphasis on automation.
What is the study plan provided?
It's our proprietary, structured roadmap that breaks down the intensive 60-hour CCNA curriculum into focused modules, prioritizing lab time and subnetting drills.
How long after the training should I take the exam?
Our advice is to schedule your exam for 1-2 weeks after the training ends. This ensures the command-line syntax and complex routing logic are at their most fluent.
Do you provide help for the simulation questions (Simlets)?
Yes. Our lab environment is specifically designed to replicate the simulation questions. Our instructors provide direct coaching on how to use the required show and configuration commands quickly.
What if I struggle specifically with Subnetting?
Subnetting speed is mandatory. We provide dedicated one-on-one coaching and drills until you can calculate VLSM and IPv6 addressing accurately and rapidly under time pressure.
What kind of support is there if I don't pass the exam?
If you take our course and follow the plan but don't pass, we provide free re-training, including one-on-one coaching and simulator extension until you are certified.
How does the 100% money-back guarantee work?
It's simple. If you are not satisfied with the quality of the hands-on instruction for any reason within the first 7 days, we refund your entire program fee, no questions asked.
Can I get help from instructors outside of class hours for my labs?
Absolutely. You get 24/7 access to our certified expert support team via a dedicated channel to troubleshoot your complex configuration errors and routing issues.
What do you mean by a "pass guarantee"?
It means we are fully invested in your result. If you attend the course, complete the practice requirements, and still don?t pass, we provide all the necessary re-training for free.
Is the money-back guarantee truly "no questions asked"?
Yes. This is an expression of our confidence in the practical, skill-building value of our CCNA training program.
Who answers my configuration questions?a support agent or a certified expert?
Your command-line and protocol questions are always handled by a CCNP or CCIE Certified Engineer with real-world troubleshooting experience.
I'm stuck on a complex OSPF adjacency issue. Can I get one-on-one help?
Yes. You can schedule a dedicated, private session with an instructor to walk you through the debug commands and troubleshooting steps to resolve complex routing problems.
How does the 24/7 expert support work for a networking course?
You will be added to a dedicated channel where you can paste sanitized configuration output and error logs, getting detailed, technical troubleshooting from our certified team.
What is your ultimate commitment to my success?
Our commitment is to transform you into a certified, competent network engineer. We provide the system, the tools, and the unwavering support.
What specific security features do you prioritize in the support?
We prioritize assistance on ACL implementation logic and NAT/PAT configuration, as these are the two high-stakes areas where misconfiguration can lead to security breaches or network outages.
Why is this course better than cheaper options in Wentzville, MO ?
Cheaper options provide outdated videos and no lab access. We provide live, expert instruction from CCIEs, hands-on configuration labs, and a guaranteed system focused on command-line fluency.
Do you offer any career support after the training is over?
Yes. We provide crucial post-certification support, including resume and LinkedIn profile optimization, ensuring your new CCNA credential unlocks high-value infrastructure roles.
Will this training help my current job, even before I'm certified?
Absolutely. The focus on troubleshooting methodology, subnetting, and IOS command practice are skills you can use immediately to manage and stabilize your current network environment.
I am not from an IT background. Is this course for me?
Yes. If you have a basic understanding of computers, this course provides the structured path to becoming a network engineer?the most foundational role in the IT industry.
What is the value of the CCNA certification in the Wentzville, MO job market?
It is the single most in-demand networking certification. It is a mandatory requirement for network roles in every major IT service provider and corporate NOC in Wentzville, MO.
How is this different from self-teaching using Cisco's free resources?
Self-teaching lacks structure and expert correction. We provide a structured curriculum with live expert guidance, personalized debugging, and a pass guarantee.
Is the Cisco CCNA certification globally recognized?
Yes. It is the global, vendor-specific standard, recognized worldwide as proof of foundational competence in Cisco routing and switching.
How does this course accelerate my career?
It provides the technical, certified proof required to move from basic IT roles to a Network Engineer or NOC Analyst role, justifying a significant increase in salary and responsibility.
How does the resume and LinkedIn support work?
Our team will help you rephrase generic points into technical competencies: "Expert in OSPFv2 and EIGRP configuration" and "Proficient in VLAN/802.1Q security and trunking."
What's the single biggest advantage of this program?
CCIE-level instruction and hands-on labs. You learn the practical, production-ready skills from the best in the industry, not just a textbook definition.

Skill Gap

One of the primary challenges facing network administrators is the need to stay up-to-date with the latest networking technologies and protocols. The Cisco Certified Network Associate (CCNA 200-301) certification addresses this skill gap by providing professionals with a comprehensive understanding of networking fundamentals.

This training program covers a wide range of topics, including routing and switching, network security, and automation. To fill the skill gap, network administrators must invest in ongoing training and education.

This includes staying current with industry trends and best practices, as well as participating in continuing education programs. In Wentzville, MO, networking professionals with the CCNA 200-301 certification can leverage their expertise to provide leadership and guidance to their peers, helping to fill the skill gap in the local IT community.

Customer Testimonials

Hear from our successful graduates
★ ★ ★ ★ ★

Great class, very informative.

user

James Conklin

Project Manager, Harris Health System

★ ★ ★ ★ ★

Great PMP<sup>&reg;</sup> Bootcamp. I had a great time taking this course. I took the course to prepare to sit for the CAPM<sup>&reg;</sup> but may be able to sit for the PMP<sup>&reg;</sup>. I learnt a lot was challenging. Great course. We need one more day. Content was very detailed.

user

Karle Scroggins

Operations Coordinator, Harris Health System

★ ★ ★ ★ ★

it was a great class. Lots of energy. And I enjoyed.

user

John Denke

Project Manager , Boeing

★ ★ ★ ★ ★

Fantastic course to prepare for PMP<sup>&reg;</sup> exam.

user

Kevin Hambrice

Global Factory Sales & Marketing Manager, ABB

★ ★ ★ ★ ★

As a participant it was smooth sailing for me.

user

Eric S. Tumlinson

Sr. Project Manager, Montco Oilfield Contractors, LLC

★ ★ ★ ★ ★

Trainer was excellent. Shared good resources and good experiences.

user

Khemoni Holmes

Project Manager, Harris Health System

★ ★ ★ ★ ★

Good content and training.

user

Dennis Glover

Project Manager, eProtex

★ ★ ★ ★ ★

I wanted to let you know that I took and passed the PMP exam. Thanks to iCertGlobal and especially my Cincinnati course instructor, who was an excellent teacher and helped me immensely.

user

Steve Ditty

Executive Director, Cogent IBS

★ ★ ★ ★ ★

Trainer was good. Trainer was very engaged and interacting. Very much satisfied with the training.

user

Stefan Long

Owner, MAGMAX Group LLC

★ ★ ★ ★ ★

I was pleasantly surprised at the quality of this training. Yomi was awesome as a trainer and working to make sure that we understood the concepts. Controlling Cost and Controlling Risk are the most complicated, but Yomi spent time after class working through questions to help others understand. This class also helped to change my perception of the PMP being this MONSTER to something that I can I can successfully do.

user

Nancy Davis

Sr. Project Manager , GK Software USA, Inc

★ ★ ★ ★ ★

Great class with a lot of information and tips to prepare for the exam

user

John Eric Nelson

Business Development Manager , WCA Waste

★ ★ ★ ★ ★

It was a great course, covered all the things that i ended up hitting road bumps on. I was the only one in the class, but the trainer was just as involved as if it had been a full class.

user

Mark Butler

Project Manager, Starbucks Via Aerotek

★ ★ ★ ★ ★

I was nervous about taking it online versus classroom; but I am actually glad I took it online. Instructor was very great and gave a good learning experience with his relevant project management experience.

user

Xeng Yang

IT Specialist, Beautiful Creations & More

★ ★ ★ ★ ★

The training was very intense but covered with course material. It was more than I expected.

user

Bernadette Gilliam

Operations/Technical Support Analyst , The Johns Hopkins Hospital

★ ★ ★ ★ ★

I thought the class was very informative. The instructor did an excellent job breaking down each chapter to where it was easy to understand. I was also very impressed with his commitment to help us pass ever after the class is over.

user

Taylor Mitchell

Business Management, AT&T

★ ★ ★ ★ ★

Excellent training. Instructor was very knowledgeable and explained information in an understandable way

user

Sandra Hamilton Allen

Sales Analyst , Alcon

★ ★ ★ ★ ★

Quality Materials presented, Instructor very knowledgeable. Exceeded my expectations.

user

Anthony Muldrow

Engineering Safety Manager, SNC-Lavalin

★ ★ ★ ★ ★

The training is a great introduction into the PMI mindset. Very informative and helpful

user

Bryan Tamburro

Managing Partner, Arrakis Development LLC

Build In-Demand Skills

Take the next step in your career today

Explore our instructor-led CCNA training to learn about the course duration, cost, eligibility, and certification process. You get practical learning, exam-focused preparation, and expert guidance. Ready to get started? Compare CCNA certification training options and choose a classroom or live online format that fits your schedule.

CCNA Training in Other Cities

Explore Our CCNA certification training is available in a city near you